Building a Custom Tube Subframe For My Coyote Swapped 1965 Mustang GT

3 553
Welcome back to the channel we are back to work on the mustang!
Big shout out to Rogue Fab!!!!!
Check Out
Bender I Used
Grab Some Merch
Runtime: 23:05


Gaz Sandall
Gaz Sandall - 9 dager siden
totally fascinated! Amazing work right there :D
Daniel Francisco
Daniel Francisco - 2 måneder siden
Podia traduzir para português
Jody Daily
Jody Daily - 2 måneder siden
I've been watching, before I say anything, this young man and friends show it doesn't take the best of the best to get the job done it the effort and heart, and at least there out getting it done Papa and mama should be proud!
spiderman nono
spiderman nono - 2 måneder siden
Im in peace watching your videos and then an. Add pops out of the blue
Pierre Labbe
Pierre Labbe - 2 måneder siden
Love Canada. Québec
romancetech - 3 måneder siden
you are a very talented kid but you need to work on your presentation you say far to many things that group you with a generation that does not have the financial ability to do what you are doing and you need to mark your vids as part 1 or 2 and so on that way followers of your projects wont be pissed trying to find your next step in your projects. the biggest thing is the titles you start with a 65 mustang then it switches to 66 which is it 66 I think as it has no gt parts that are seen. as to your frame build I feel that you are smart enough to design a frame just not going about it in the right step form always build to with stand a catastrophic failure and by that i mean think about how you will fix the car if it were smashed in the front. do some research about the key factors of a solid frame after all you are on you tube so you do know how to use the internet put your projects above the rest of the for lack of a better term back yard boys. Build it better safer and faster but also on the short dime good luck cant wait to see how this one turns out
wayne goff
wayne goff - 3 måneder siden
The real part is thinner because it's a different grade of steel. Your mild steel may be thicker but not necessarily stronger.
slaphappy813 - 3 måneder siden
did you take into account the actual rear wheelbase width when you made the subframe?
slaphappy813 - 3 måneder siden
ever weld with the devil in the sparking hot light?
Anthony - 3 måneder siden
You don’t yell in your videos no more that’s good ha
Dan Ashcroft
Dan Ashcroft - 4 måneder siden
Love your channel but you need to start numbering your episodes as its difficult to know which is which and where you are in the build...Great work by the way and forget the thumbs down crowd as its you doing it not them...
Erika Coronado
Erika Coronado - 5 måneder siden
hola amigo porque no creas otro canal en español tus vídeo son buenos
BullDog - 5 måneder siden
James Colter
James Colter - 5 måneder siden
God I hate unboxing videos.
Sam. Voltz
Sam. Voltz - 5 måneder siden
This car gotta be heavy as F! Lbvs great job
DesignatedEagle F
DesignatedEagle F - 5 måneder siden
I love this shit. I always wondered how race car guys build roll cages out of that tubing and now I know. for your next project, you should try building a side by side from scratch. Like a Kawasaki KRX 1000. You could design and manufacture your own and sell them... A coyote powered side by side! LMAO.
synth_storm - 5 måneder siden
like the pyjamas lol
Varun Raj Salian
Varun Raj Salian - 5 måneder siden
This was the most simple way to explain a complicated sub frame fabrication may God bless you Mate
Elko Aztec
Elko Aztec - 5 måneder siden
Kid have talent have healthy brains 🧠 he is young and way ahead of the game that is very grate
Elko Aztec
Elko Aztec - 5 måneder siden
Yes you can do it anything just put your mind on it fuk the haters
Vladimir 5466
Vladimir 5466 - 5 måneder siden
Вроде и не понимаю английский язык, а все равно смотрю😃👍
Gurjeet Pabla
Gurjeet Pabla - 5 måneder siden
Ed Mi
Ed Mi - 5 måneder siden
We bought a welding table... then we bought another one... then we welded them together 😂
Tony Picillo
Tony Picillo - 5 måneder siden
Link to the tube bender, I like it
Tony Picillo
Tony Picillo - 5 måneder siden
Found it sorry
lipout100 - 5 måneder siden
Got some serious fabricating skills. Way to go
Connor Ohoare
Connor Ohoare - 5 måneder siden
That lockdown haircut feels
Anant Maher
Anant Maher - 5 måneder siden
Dude buy a Stanley knife, I keep wincing when you use a razor blade to cut or open things.
Charles Wills
Charles Wills - 5 måneder siden
Cant wait for the next video.
Michael Waldo
Michael Waldo - 5 måneder siden
Amazing work the tools you got now will help you out
Rahma Fixa
Rahma Fixa - 6 måneder siden
alberto mora
alberto mora - 6 måneder siden
V tune ....please an you put the link to the music on your videos....thx sir.......good content as always
arty Berkhoff
arty Berkhoff - 6 måneder siden
Are you planning to hae adjustable camber and caster?
cajunO21 - 6 måneder siden
Personally, Im glad you decided to build a new cross member rather than using the overly modified crossmember.
Paul-Ivo B.
Paul-Ivo B. - 6 måneder siden
Go to the barber please 🤣
vTuned garage
vTuned garage - 6 måneder siden
Their closed lol
Jimf - 6 måneder siden
Very well done. methodical and careful.
2H80vids - 6 måneder siden
Nice to be back with the Mustang build.👍 I'm really enjoying watching this process; it's stuff I know nothing about but still very interesting. Apart from one glimpse of a spirit level, there doesn't seem to be a lot of "precision" here, lots of cutting and welding and "making things fit". Is this normal when building the front of a car from scratch? I'm certainly not criticising, not with no knowledge of the subject, just surprised it seems so straightforward. Is the tricky stuff still to come, as suspension gets added?
Even when the pipe-bender was being welded together, I thought there would be far more precision involved; the gauge on the side doen't look all that accurate. Just curious.😁

Cheers for now,
Chef Brian Melling
Chef Brian Melling - 6 måneder siden
@vTuned Garage - work faster on them progress videos!
GD show
GD show - 6 måneder siden
I like that you stopped saying absolutely amazing! Thanks man respect to you tho for doing the subframe yourself. That’s a ballze move!!!
Rishal Singh
Rishal Singh - 6 måneder siden
coupe style eleanor mustang?😬
NEILINHO - 6 måneder siden
you guys are back with the mustang i had already unsubcribe but im glad to see the mustang back i wanna see the finished product
Vaios Kaliakoudas
Vaios Kaliakoudas - 6 måneder siden
That kinda goonzquad-lookin video editing...
Edogawa1117 - 6 måneder siden
Awesome video'VTuned,has really upped his game.his videos used to be pretty tax but now they are very accomplished.
john enright
john enright - 6 måneder siden
Loving your work!!! Not afraid to have a go and the outcome is awesome :)
N Hodgson
N Hodgson - 6 måneder siden
Great job, man! You could always bend the plates you made for the front control arm attachment point so that they are parallel with each other.
William Greenwalt
William Greenwalt - 6 måneder siden
Very God
Rusted Bolts & Buckets
Rusted Bolts & Buckets - 6 måneder siden
I'm torn - I don't know what I like more - the video or the comments
Pip - 6 måneder siden
I would have struggled with just building the tube bending device ... leave alone fabricating a subframe. I think the engine would fall out if I tried ... Looking forward to seeing the build take shape .. .
mohammed Fazal
mohammed Fazal - 6 måneder siden
Ren - 6 måneder siden
I wish you good luck with your project. I would like to be as optimistic as you. I think you are missing a lot of calculation and engineer but I really wish you complete this project and that the car runs perfectly.
Stay True TV
Stay True TV - 6 måneder siden
Been hanging for the mustang to return 👍,
That pipe bender makes easy work of it. I bent up new frame rails for a build on my channel not to long ago, using the traditional style bender 🤪, after watching this think I may have to invest in this style for future projects..
Awsome job on the subframe keep up the awsome work ✌
Mustang Boss
Mustang Boss - 6 måneder siden
Thats the thing customer work comes first. Hope you can finish it in this time. A roll cage is not nessasary. As the car you took the moter out is stock... restomod it otherwise its just rice.make a nice tube frame instead for the front end
DK Goodrich
DK Goodrich - 6 måneder siden
Keep up the good work mane
jimmy choo
jimmy choo - 6 måneder siden
Loving this 👍👍👍
Ronald Davis
Ronald Davis - 6 måneder siden
Getting closer. Love it
wirenut003 - 6 måneder siden
You should try and get a stress test done on a welded made up piece .Just to be on the safe side,see how strong that weld is. Remember you got weight and torque and speed in the car your building
jekell101 - 6 måneder siden
This kid has more ambition is his left pocket than 95% of the people out there have altogether. I love it. At least at some point we can all say we were watching this guy "back when".
Tony Melo
Tony Melo - 6 måneder siden
Why a coyote?! Those engines fucking suck! You should have gone with an LS!........Like every single other dickhead on earth. I love the coyote. It's a fucking awesome engine. Thanks for the video!
Rick Bareman
Rick Bareman - 6 måneder siden
great job v tune keep up the good work this mustang will be a one of a kind mustang and you will be able to say I built that, awesome job.
Jac Clayton
Jac Clayton - 6 måneder siden
Not wanting to seem critical but that tubing is what’s called seamed, which is unsuitable for this purpose,. The type needed is what’s called drawn pipe which is used in roll cages for the strength it produces under load example being in a collision
Knowledge Freedom
Knowledge Freedom - 6 måneder siden
Great video man! We all have been waiting for a Stang vid. ✌️
One Shotlpm
One Shotlpm - 6 måneder siden
You are super talented mate
yamaha ttr600
yamaha ttr600 - 6 måneder siden
Good to see you back thanks for the video
Marciaus007 - 6 måneder siden
You should get them gloves or your hands going to be all taped
Sepeda Ku
Sepeda Ku - 6 måneder siden
I've learned a lot of stuff from this guy.
James Sheets
James Sheets - 6 måneder siden
@vTuned garage: you need to emphasize the importance of having accurate measurements and datum points when doing a build like this. There are people that will use your videos for guidance in attempting a similar project. Using phrases like "goes somewhere around here", "looks pretty close", and other similar terms is doing a huge disservice to your viewers and subscribers. There are many books that are written on the subject of suspension design because it is a VERY important part of an automobile. Something can always be welded together that will bolt in but that doesn't mean it won't be a death trap.
I understand that you have a lot of followers and I will probably be roasted and called everything but a white man. It is also important to know that it is not allowed to build roll cages and other components of a car with welded seam pipe in any form of racing. Yes, you may have no problems at all but is it worth the risk because the pipe was cheaper? I will take the backlash if it means that only one person steps back and rethinks the situation and builds something proper. It's not only the builders life at risk but the people around the automobile on the road.
Before anyone leaves a nasty comment towards me watch the video in this link for a comparison. It is going to be a whole series so there are other videos too.
Tony Chamberlain
Tony Chamberlain - 6 måneder siden
Injoying watching mate Tony in uk
JAntrax - 6 måneder siden
This guy is a genius🔥
Victor Gallardo
Victor Gallardo - 6 måneder siden
For those who said no why are u guys watching make your videos and stop heating on people that are actually doing something and making things work
Mike Formichelli
Mike Formichelli - 6 måneder siden
Awesome job. Can't wait to see what's net.
2019 Camaro SS 1LE
2019 Camaro SS 1LE - 6 måneder siden
Can you imagine VTuned working in the sixties along side Shelby. I think Shelby would be amazed, VTuned could possibly be Ken Miles reincarnation. “Hold my beer Shelby”
John Jason
John Jason - 6 måneder siden
I'm sure someone told you that spraying the die with a lubricant makes the bend so much easier on both the machine and the pipe being bent. When finished clean before welding... great videos. I'm 71 and enjoy your work
Greig Wilson
Greig Wilson - 6 måneder siden
Vtuned you are a wee Legend . So skillful
CaptainChris - 6 måneder siden
You are the best Bro! Keep on the good work. Cant wait to see the next Vid
Phil UK Net
Phil UK Net - 6 måneder siden
This project has been quiet for a while. Impressive fabrication skills. It's like watching a sane version of Colin Furze.
Leonid Zykov
Leonid Zykov - 6 måneder siden
Ты крутой!!! Возьми в команду, работа мечта)
General Disarray
General Disarray - 6 måneder siden
b is for build took their 1967 bodied 2015 gt for its first drive the other day.
tanhelmet - 6 måneder siden
You need to file a copyright (s) and trademark(s) (5) of all that those brackets, benders, and undercarriage. Specifically the welding process. YOU SIR,....KICK ASS. YOU ARE SUPER TALENTED.
Timothy Nichols
Timothy Nichols - 6 måneder siden
Awesome Video!! You are Very Talented!! Love The Channel!!
Owen Morrrison
Owen Morrrison - 6 måneder siden
Genius at work, dude you very talented 💚💚🇯🇲🇯🇲🇺🇸🇺🇸
mr. Uten
mr. Uten - 6 måneder siden
Patience is virtue👍 slowly but surely😍 his built😎 his passion👍🤑 keep it up sir😎 goodjob👍👍
Miles Rains
Miles Rains - 6 måneder siden
It's not a matter of getting it done. It's about getting it done properly per the realities of physics. The engineering challenges of getting the suspension geometry correct and the build strong yet light are daunting. Your enthusiasm is contagious.
Anthony S
Anthony S - 6 måneder siden
Gaslands Mechanic
Gaslands Mechanic - 6 måneder siden
Never tell a frame guy he can't build a custom frame. Silly people.
Brock Lagunas
Brock Lagunas - 6 måneder siden
I know you verified clearance between your tie rods and forward control arm mount, but also make sure you have clearance when you are turned. Otherwise you’ll be crawling into every driveway you turn into. It just seemed close from the angle you were filming from.
Simon Blunden
Simon Blunden - 6 måneder siden
Great progress! Should be done by next week?
Racerman27410 - 6 måneder siden
To be successful at anything you must first remove the word "can't" from your vocabulary. "Can't never could do nothing" i believe is the old saying. Great video and CAN do!
Caleb Brown
Caleb Brown - 6 måneder siden
Its all coming together.
66Pipes66 - 6 måneder siden
I like your can do attitude. Considering the shite tools you’re working with,you’re doing ok 👍
Jon G
Jon G - 6 måneder siden
I'll be honest with you, when I first saw you taking on the mustang project, I also thought, 'it can't be done'. But now I see your vision and I know you will be able to pull it off. I commend you for your work ethic, I admire your tenacity, you don't let anything stop you! I admire your talent and looking forward to seeing the completion of this and any future projects you might take on. You are a great example for young men and women who love working on cars! I'm 67 years old and when I was your age I built a business (VW and Audi) and I taught myself how to build engines and transmissions, both stock and racing and also did machine work: milling machine and lathe. Keep up the good work!!
165alice1002 - 6 måneder siden
Are you guys building a car or selling tools ???????
Atul M
Atul M - 6 måneder siden
Bro you're a mad scientist
Wayne Brogdon
Wayne Brogdon - 6 måneder siden
Have you taken engineering classes? My gosh you do great work
josip broz
josip broz - 6 måneder siden
hi,on 13:15 how you call that machine(holder) and how much it costs.
trainmanbob - 6 måneder siden
I think I just watched a masterclass in building. Fantastic entertainment and skill.
Stay Safe
Cheers, Bob
nelson gallaher
nelson gallaher - 6 måneder siden
I love the confidence that you have !! You say it...then do its no big deal. You DO have skills. Pay no attention to the haters and keep the videos coming. Can't wait til the Stang is finished.
Andrzej Woźniak
Andrzej Woźniak - 6 måneder siden
hey man, where can I find your background music, I like it, put in the access path, don't be asked. greetings from Poland.
يوسف اليوسف
يوسف اليوسف - 6 måneder siden
شغل منتاز
Ole Volder
Ole Volder - 6 måneder siden
what blade do you use on your dry cut chop saw ? Can you place a link where to buy it and ?
Ole Volder
Ole Volder - 6 måneder siden
I dont know the english word for the "blade" "chop disk" maybe disk saw :-D
Greg Wayne
Greg Wayne - 6 måneder siden
So glad he's back to working on the stang! Love it!
Dave - 6 måneder siden
vTuned: "I'm going to make a Classic car with a modern powertrain."
3 months later...
vTuned: "So anyway, I've expanded the frame repair business into a full machining and fabrication shop."