Building Custom Interior For My BMW E30 V8 SWAP - Episode 6

1 450
Hey guys in todays video we are Building The Interior For My BMW E30 V8 Swap! Enjoy
👕Vtuned Store :
🔥Follow on instagram :
Runtime: 27:14


vTuned garage
vTuned garage - 18 dager siden
gagan yadav
gagan yadav - 18 dager siden
I think red pain is more attractive then black paint on roll cage
Priyansh Gupta
Priyansh Gupta - 18 dager siden
Hey, try painting your roll cage .. white It will pop out really good
Samuel Quinn
Samuel Quinn - 5 dager siden
Cool building
VTEC ROAR - 6 dager siden
Celaning the carpet ? no no no no ! extraction vacum this method is good for granpas with one year old car for sure.
Laurel Bobo
Laurel Bobo - 6 dager siden
A little off topic but I was wondering if you are related to the goonzquad boys? Are your pops brothers?
M Hollins
M Hollins - 6 dager siden
that looks goooood
Zac HK
Zac HK - 12 dager siden
when you are so focused and hold the spray can cap in hand , just make me want to laugh 😂
Jimf - 14 dager siden
when you find a position for the seat, it is pretty common to build a brace between the harness bar and the back of the seat. Really stabilizes the seat. Project looks great so far...good idea dyeing the carpet. don't forget dynamat under the panels
Dal Call Center
Dal Call Center - 15 dager siden
Would paint the blue black or cover....the blue looks weird with all the black
Verkoop Van Veen
Verkoop Van Veen - 15 dager siden
really good looking interior.
Club Sport
Club Sport - 15 dager siden
That shopvac seen some shiiiyeeett.
Ni Yo
Ni Yo - 15 dager siden
I'm trying to find out what artist and song starts at 12:56. I love that track.
Justin Hansen
Justin Hansen - 15 dager siden
Invest in an extractor and a tornador for better detailing.
ismael chavez
ismael chavez - 15 dager siden
John barfneck
John barfneck - 15 dager siden
in kentucky they literally moved whole cities/towns up out of the flood zones to stop wasting monies every year to repair damaged properties/homes/businesses...........,15831
Brandon Harrison
Brandon Harrison - 15 dager siden
Love your videos man 🤙🏼
fchapp - 15 dager siden
Like you said, leave the back panel design, but paint it black to match the carpet, the blue cage will set the interior off nicely.
MrBLUEDEVILUK - 15 dager siden
I would have coated the rear shelf with resin. Then stretched black fleece material over it. Revolted the fleece with more resin using a roller. Leave to more speaker holes!
Larry Joffe
Larry Joffe - 16 dager siden
There are so many things wrong with this roll cage. Please do some research on how to properly design, fabricate and install a a cage into a sedan. The hardware you are using needs to be hardened, you must use a backing plate. The main hoop MUST have a solid cross bar that goes from behind drivers head to the bottom of the hoop closest to the floor behind the passenger. the rear supports should be mounted into the wheel wells, not the seatback backs. That steel is no structurally strong enough to support in the event of an accident.
A cage NEVER mounts on top of carpet!!! That is actually against every sanctioning bodies rules governing how to properly install a cage! It has to be metal to metal contact. Even in showroom stock racing, you have to cut the carpet for the cage to mount to the steel even when bolted to the car. Still need backing plates and correct hardware.
Oliver Harwood
Oliver Harwood - 16 dager siden
Wear a mask when you go into a store!
atenabetagam - 16 dager siden
17:30 Hey Ben open a PO Box I'll send you some new Sharpie 😂😉
JFreak176 - 16 dager siden
You should put some sound deadening under the carpet, bed liner alone isn't gonna cut it!
Scraky14 mtb
Scraky14 mtb - 16 dager siden
loving the build so far mate..
Nathaniel Mathies
Nathaniel Mathies - 16 dager siden
If you're into watching someone clean things then paint it with a $4 rattle can, this video is right up your alley!
Victor Ramirez
Victor Ramirez - 16 dager siden
what we're gonna do now is paint the carpet
ok now what we're gonna do is paint the carpet
::paints carpet::
ok we just painted the carpet
fire your editor please
James Luke
James Luke - 16 dager siden
JandJ out of Wichita, KS??? John Ross, Tyler Hoover and Car Wizard might ger jealous. LOL! 😜😝😂
jonathan lopez
jonathan lopez - 16 dager siden
Should make a board like the bottom half take the seat brackets off the seat and use them on the board to hold onto the wall and then wrap it in carpet
Ricardo Herrera
Ricardo Herrera - 16 dager siden
Name of the paint please
chilliin - 16 dager siden
perfectly, just perfectly
Kulemya Mutoya
Kulemya Mutoya - 16 dager siden
Like the style of this video
jamar humphries
jamar humphries - 16 dager siden
I think you should paint the back black
Fearless Fosdick
Fearless Fosdick - 16 dager siden
You guys need a contour gauge for all those custom irregular shape cutouts like the rear seat MDF. They are cheap and the result is professional looking fitment.
Robert Chryssikos
Robert Chryssikos - 16 dager siden
Why don’t you sell 5xll in shirts
MadeinTN - 17 dager siden
I think the blue cage will look good. But in the back where its blue I'd get a trim shop to make a black board with "VTUNED" trimmed in blue.
josh williams
josh williams - 17 dager siden
I would recommend putting in some good sound deadening
Willem P
Willem P - 17 dager siden
You can fit a nice subwoofer on the back seat there....
Israr Ashraf
Israr Ashraf - 17 dager siden
Excited to see the complete build 😎
GTA - 17 dager siden
So I'm gonna go ahead and write a perfect comment for you guys. So I went ahead and wrote this awesome comment and next up I'm gonna go ahead and click the super cool "comment" button. So I went ahead and clicked the awesome "comment" button for you guys.....

Naaah just kidding. Love this channel :-)
risma yanti
risma yanti - 17 dager siden
mantap bos. bos ada ga buat saya.???
Roy Steven Ung
Roy Steven Ung - 17 dager siden
larry Lathrop
larry Lathrop - 17 dager siden
Seems to be a lot of kids now a days that have a great work ethic have good parents and are not scared of hard work. Having good parents help a lot. I know mom and pops are proud of their kids. You are only as happy as your most unhappy child. Looks like mom and dad tuned are totally happy.
Sahl Ahmed
Sahl Ahmed - 17 dager siden
Waiting for mustang video👀
Gabriel Ledesma
Gabriel Ledesma - 17 dager siden
No respiratory protection while spraying paint. 🚫
Carlos Moya
Carlos Moya - 17 dager siden
Hola soy de Argentina buenos Aires te sigo siempre nome pierdo un capítulo sos un maestro como dejas los autos Saludos men
Mr.98civic reyes
Mr.98civic reyes - 17 dager siden
You definitely should of put down some sound deadener before you put the carpet and the other interior parts in. Definitely would help with all the noise from outside
ali daghari
ali daghari - 17 dager siden
I think you should have use acétone on thé vinyles before repeinting it
Grzegorz Kolbrecki
Grzegorz Kolbrecki - 17 dager siden
Death trap :( This cage is dangerous in case of front or side hit. It might only help while rolling over.
Aditya Sasank
Aditya Sasank - 17 dager siden
10:52 I knew it was gonna happen. He will regret it . 😂.
Thomas Studio
Thomas Studio - 17 dager siden
I thought you were going to razor your wrists, it got pretty close!
Le Quan
Le Quan - 17 dager siden
how to get this vehicle licensed on the road?
Rick Rasterdly
Rick Rasterdly - 17 dager siden
You risked it for a biscuit spraying the carpet!
Great video again Vtuned
Diaaust12r - 17 dager siden
Put carpet unstead of that mdf pannel and insulation foam. It will look amazing. Thumbs up its coming together. I can't wait to see tge LS engine running this built, it will be a beast!
David Sandford
David Sandford - 17 dager siden
How many of you thought he said “media ford”. When actually he said “mdf board”. 🤔
Russell Ellis
Russell Ellis - 17 dager siden
I would suggest framing out the back panel and leaving plexiglass window to show off the metal stamp work designs. It will allow you to highlight the designs while adding some sound barrier at the same time.
Eddy Sanchez Casas
Eddy Sanchez Casas - 17 dager siden
Moondyne .Joe
Moondyne .Joe - 17 dager siden
Vtuned, if you are going to use the car on the track officially, I think you better check the rules I'm sure that the roll cage has to be welded in not bolted or the scrutineers will NOT Pass it.
Tony from Western Australia
Braddah Brother
Braddah Brother - 17 dager siden
Auwrite Ben!
You'll surely be ready for drifting "bad" as Uncle Sam, at the LS Fest in Bowling Green Kentucky by next fall..
Benoit Champeymond
Benoit Champeymond - 17 dager siden
Dope channel !
Bigdoug ss
Bigdoug ss - 17 dager siden
Definitely put carpet on the back wall of the seat
Can I get a shout out plz
New fan
vTuned garage
vTuned garage - 17 dager siden
Welcome 🙏🏽
Drew Crews
Drew Crews - 17 dager siden
V, you need a contour gauge to make those tricky cuts like on that back mdf, and engine firewall of the mustang... they're cheap and way faster and easier than cardboard templates...
David Pascal
David Pascal - 17 dager siden
with all that black you gonna need an AC😂😂
Jordan Harris
Jordan Harris - 17 dager siden
Barbasol foam shaving cream works wonders for cleaning carpet
Danik Bikes
Danik Bikes - 17 dager siden
Flock the dash. Would look killer
IHcubcadet - 17 dager siden
Great work man!
Anom Amos
Anom Amos - 17 dager siden
When spraying carpet you brush it in one direction first spray it then brush it in the other direction and spray it again then if it needs another coat you brush it 90^ to they way you did before. That way you get all the strands fully coated.
Andrew Ferguson
Andrew Ferguson - 17 dager siden
Great Job!!! Thank You... :-)
Ulises Orozco
Ulises Orozco - 17 dager siden
You’re lame for the amount of ads
Starting Tech
Starting Tech - 17 dager siden
Adblock bro
bnelson313 - 17 dager siden
Less paint runs when painting
Scuba Guy
Scuba Guy - 17 dager siden
put your Vtuned logo in the back.
Schnitzer325ci - 17 dager siden
Surprised you didn't jet wash the carpets first? Looks really good and coming along nicely. Carpet the back and leave the cage Black.
Josh Ehman
Josh Ehman - 17 dager siden
get it bruh!
Nick 24
Nick 24 - 17 dager siden
25:21 he says sparcoo seat and it's recaro🤣🤣
ShottBoss2017 Progress
ShottBoss2017 Progress - 18 dager siden
Great job... I would carpet that back piece and color match the roll cage to the car.. I think it would pop more that way.. leaving that back piece exposed, the lames are not going to understand
Vaselinos - 18 dager siden
Do similar shapes to that mdf as is in back firewall
jamie d
jamie d - 18 dager siden
You could just paint the back black, you keep the color flow plus keep the cool design 😎
Viktor Ottosson
Viktor Ottosson - 18 dager siden
I think it looks awsome dude ! And hey, wrap the backseat panel to, it will increase the Finnishness to spot on ! 👌🏻
Take Down
Take Down - 18 dager siden
Gotta love V. No sheets or blankets down just spray it on the floor of the garage. Adds character lol. Nice job mate
Nicholas Trado
Nicholas Trado - 18 dager siden
the square edges on the MDF is killing me
Michael Dorman
Michael Dorman - 18 dager siden
I think it would look so much better if you carpeted the back as well. But it looks great, keep up the good work 👍
Chad Reynolds
Chad Reynolds - 18 dager siden
Carpet the back.... way clean
jeremy evans
jeremy evans - 18 dager siden
I think you should just polish the cage up little and clear coat it
Raul Matias
Raul Matias - 18 dager siden
Paint the pattern in the back seat panel black
Rushdien Worship
Rushdien Worship - 18 dager siden
Car looks good coming on realy nicely i no this video hours out already i get my notification hours later as I'm from South Africa 👌
Rushdien Worship
Rushdien Worship - 18 dager siden
Paint the back designs in black to give it a nice look seen that panels and floor carpert looks good nice work on the e30 Vtune keep it up
Pumpkingilmour - 18 dager siden
Wrap the roll bar in carpeting or matte black rubber tubing for sound dampening
Cestus Fr
Cestus Fr - 18 dager siden
Man... you did an amazing job! ^______^
Robert Troxel
Robert Troxel - 18 dager siden
Why not use Fat Mat sound suppression to hold down the noise?
paulie98vr6 - 18 dager siden
I was doing the same thing a couple months ago with my ‘85. I bought it with no interior other than two junk racing seats and a dashboard. I’ve been using my ‘88 parts car and swapped the whole interior. I used the same paint you used for my back panel with the speakers, swapped the dash from the ‘88 and painted it along with the console. Side back panels weren’t too bad and I haven’t gotten to the door panels yet. The seats from the parts car are pretty rough, but I kinda like the aged look on certain things. I painted the whole interior with rust reformer paint after patching some holes in the floor pan, I think it looks pretty good as I’m not using the carpet. I used bed liner on the footwell areas and have been painting the engine bay lately. I also undercoated the whole driver side and wheel wells so far. Mine isn’t gonna have a roll cage or cool motor or anything, but it’s looking a lot better. I also had to fix a lot of the normal things the car should have(dome lights, horn that works, power locks, cruise control, washer fluid reservoir and pump, rear seat belts, etc.) The previous owner had cut all the wiring and deleted all that stuff so it’s been a pain, but I’ve learned a lot about the e30’s in the process. There are differences in the interior, seat belts, and wiring, gauge clusters between my two e30’s which have given me issues but I’m making progress. I loved watching you work on the Mustang as the first Mustangs are my favorite, but seeing you guys working on your e30’s is more enjoyable because you’re doing a lot of the things I’ve been doing. You definitely have better resources and talent than I do though. Keep up the great work.
Spinz - 18 dager siden
are ya'll going to fix the dash?
Max Auto Mag
Max Auto Mag - 18 dager siden
Looks good brother... keep up the good work
Billy Hayse
Billy Hayse - 18 dager siden
Enjoyed the video. Too bad there was a creepy uncle Joe add that ruined it , good job V!
A Google user
A Google user - 18 dager siden
When are you going to finish the Mustang?
Information Overload
Information Overload - 18 dager siden
11:27 Why not weld the nuts to the underplate? :)
tazfaninafocus - 18 dager siden
25:22 PMSL.
The car is coming along really nicely. Unsure about the rear being left uncarpeted though. As the carpet is quite thin, you could still get the contours to show though. Apply the adhesive to the car and the carpet, let it dry off, and you will be able to lay it across and use a spoon (best thing) to stretch the carpet into the recesses. I think that would look quite good.
Nayyer Iqbal
Nayyer Iqbal - 18 dager siden
really interesting man loving it
tazfaninafocus - 18 dager siden
23:56. WTF!? No idea at all about self-preservation. Cringe.
Mitch Griffin
Mitch Griffin - 18 dager siden
Recaro isn't going to be happy that you called their seat a Sparco.....
In Detail Car Care Solutions
In Detail Car Care Solutions - 18 dager siden
It’s unbelievable how you are willing to give anything a go and your work ethic just keeps impressing me more and more. I hope you don’t mind, but I use your videos as inspiration for my students. I’m an industrial arts teacher in NSW Australia (woodwork, metalwork, tech drawing, engineering and design) and I’ve been working with young people and students for nearly 40 years. It is so refreshing to see you go out and just get stuck in and give it a go. No whining or whinging (on camera anyway) or looking for help before having a go yourself. Keep the great content coming.
larry Lathrop
larry Lathrop - 17 dager siden
Yes sir. I our younger years the only way to learn a trade was to work hard enough so the old timers would give you the skills they have learned. The old timers love the work and loved to give the knowledge to younger guys but you had to earn it with a good work ethic. The kids now a days are not concerned about Carrying on the skills as much. It nice to see younger guys with a good work ethic. I have 6 kids and lucky for me they all are great kids with a good work ethic. They had to earn everything they got. It makes a difference. We can easily pick out the spoiled kids now a days.
Frank Dobisch
Frank Dobisch - 18 dager siden
How about wrapping the back uncovered area with a vinyl wrap design?