Lowering The Body on My 1966 Ford Mustang Coyote Swap.

3 278
45
 
Welcome back to the channel in todays video we Work on The 1966 Ford Mustang.We ad to Lower the Body down To make the wheels fit better.
👕Vtuned Store : www.vtuned.com
🔥Follow on instagram instagram.com/vtuned/
Motor
Runtime: 15:35

Kommentarer

wEiRd__ gUy
wEiRd__ gUy - Måned siden
at 2:47 LOL did you see that car where the front tire was out off air and she/he still drived it LOL
Mohammad Alam
Mohammad Alam - Måned siden
You could learn Autocad just to design and have reference of measurements it will same you a lot of time and money. Best wishes. I love hard working people.
StephenRockers16
StephenRockers16 - Måned siden
@1:15 my dude living in 3020! I never thought to do that with any wheels or tires that I'm working on.
Dejavu Wilson 84
Dejavu Wilson 84 - Måned siden
Is this a Tokyo Drift Tuner Mustang
rgbigdog
rgbigdog - Måned siden
The body is always bolted to the frame when it's a body on frame design.
Minnehof
Minnehof - 2 måneder siden
Well done Vtuned! :D
Don't make it a Bisforbuild "Eleanor".
Before you know it you have lost your car ;)
That would be a shame
Luis garcia
Luis garcia - 2 måneder siden
You know you seriously consider wearing Gloves when using a Cuttung wheel with no safety Guard .
I.m Jolly
I.m Jolly - 2 måneder siden
If the disk shattered he'd be labotomised by the thing.Workplaces in Australia are parilised with all the health and safety but in america they glorify and telivise bad practices.Wouldnt want to see the young fella get hurt.
Richard Williams
Richard Williams - 2 måneder siden
I respect your work and ambition,I am also rebuilding my vehicle and always have to plan my metal work but i know one day i will enjoy that car one day. Keep on moving forward
James Seaman
James Seaman - 2 måneder siden
I’m looking forward to more videos on this build!
alexis betancourt
alexis betancourt - 3 måneder siden
V tuned is that your GTR smashed in the background
alexis betancourt
alexis betancourt - 3 måneder siden
Ahhh new content on the way
vTuned garage
vTuned garage - 3 måneder siden
alexis betancourt that’s another gtr
alexis betancourt
alexis betancourt - 3 måneder siden
What did you do bro ?
vTuned garage
vTuned garage - 3 måneder siden
Yes
Jr Salazar
Jr Salazar - 3 måneder siden
🇲🇽👍🏼👌🏻
Ramon Rios
Ramon Rios - 3 måneder siden
The way I look at it there’s no impossible for you thanks for sharing I Watch your videos from Eureka California
vlad mashv
vlad mashv - 3 måneder siden
i like them wheels on this ride
Robert Bittles
Robert Bittles - 3 måneder siden
2:45. It's ok.... it's only flat on the one side. 🤣
Gary Hampson
Gary Hampson - 3 måneder siden
I think you're awesome at everything you do
Aurelio Miranda
Aurelio Miranda - 3 måneder siden
https://www.youtube.com/watch?v=0zD6rWU06fo
Ivan Madrid
Ivan Madrid - 3 måneder siden
Hell of a project dude i like it
Centarion
Centarion - 3 måneder siden
I was thinking that perhaps get an OEM chassis for the stang and model the subframe after that but allow for the lowering and extra width needed for the amalgamation of the new stang with the old. Love the build so far. hang in there mate!
Trey Faulkner
Trey Faulkner - 3 måneder siden
love that you keep grinding and dont give up on this build!! my favorite youtube rebuild ever
Rock girl
Rock girl - 3 måneder siden
wsit to see the finished project.
aXBlackDeathXa
aXBlackDeathXa - 3 måneder siden
If you're looking for some help with a chassis build check out Street Rod Garage 5510 Main Street Grant, AL 35747. These guys did the chassis for the Triple Threat Camaro built on PowerNationTV.
jeff v
jeff v - 3 måneder siden
You are doing an amazing job V. Keep it up!!
Chris Atkinson
Chris Atkinson - 3 måneder siden
Check out Art Morrison's website V. Maybe ask them for some guidance.
Rock girl
Rock girl - 3 måneder siden
Three adverts in 5 mins, Four ads by 8 mins... dude, I know you need to fund, but that's taking the pi55. I like watching your stuff but I'm not here for that much irritation.
The Declining Cyclist
The Declining Cyclist - 3 måneder siden
Please put the guard on your angle grinder. The car will never get finished if you haven’t got any fingers left.....
josh youngs
josh youngs - 3 måneder siden
What ever you do DON'T call it Eleanor. Don't even mention it in a video.
Neil Dennis
Neil Dennis - 3 måneder siden
Love the videos but who's kidding who this has been a disaster so far and I'm guessing everything done to this point will have to be torn back out.....cut back out.....or pried apart. Complete rebuild. Start from scratch and actually plan 3 or 4 steps ahead....not 1 step ahead.
Neil Dennis
Neil Dennis - 3 måneder siden
Do still love the vids though and wish you the best.
asioe kiou
asioe kiou - 3 måneder siden
I had to laugh at 0:47 have to install a jack stand? ah just lift up the back of the car by hand lolol.....
asioe kiou
asioe kiou - 3 måneder siden
you are doing a great job. You will be driving down the street before you know it.
rev headz
rev headz - 3 måneder siden
so you have a shop with a pulling irg, but you don't have a tire machine? what a savage
asioe kiou
asioe kiou - 3 måneder siden
cobbling together a DIY front subframe that may not work. Just my 2 cents.
Cnoevo Auto Adventures
Cnoevo Auto Adventures - 3 måneder siden
man this thing is gonna be ripping the streets in no time
Peter Day I Am
Peter Day I Am - 3 måneder siden
Really enjoying this build. Binged watched this series since yesterday afternoon. You are doing awesome work. Keep it up.
asioe kiou
asioe kiou - 3 måneder siden
I had to laugh at 0:47 have to install a jack stand? ah just lift up the back of the car by hand lolol.....
Larry Hall
Larry Hall - 3 måneder siden
Liked what you did on Uncle Sam. Great job and can't wait to see what you are doing to the stang
John Webber
John Webber - 3 måneder siden
Hey vTuned... Now your rockin... Keep those vids coming. We'd like to see you really kick butt on that mustang as fast as you can, and we'll support you all the way up to over 2MM subscriptions.
Sammy Lisa Smith
Sammy Lisa Smith - 3 måneder siden
Stial working on the 65 floor pans outer will houses and dor jam's i can't see puting a 4.6 in it working on my wife's 2002 v6 car she wonts a 302
Gregg KUZILA
Gregg KUZILA - 3 måneder siden
Didn't you find a NASCAR guy???
Just Ben
Just Ben - 3 måneder siden
Here from Fasterproms. 👍
Ricardo Baerga
Ricardo Baerga - 3 måneder siden
You’ve got guts buddy; we’re rooting for you.
leuvenlife
leuvenlife - 3 måneder siden
Three adverts in 5 mins, Four ads by 8 mins... dude, I know you need to fund, but that's taking the pi55. I like watching your stuff but I'm not here for that much irritation.
sannio komi
sannio komi - 3 måneder siden
I had to laugh at 0:47 have to install a jack stand? ah just lift up the back of the car by hand lolol.....
huttio srreu
huttio srreu - 3 måneder siden
Wow..I learned something new today.. For the First time in my 60, Have seen rolling tires 👏🏾👏🏾👏🏾😂
UPushedIt
UPushedIt - 3 måneder siden
=vvv bmx
MrMurph111
MrMurph111 - 3 måneder siden
You already split the car in half, why don't you pick up a 2015-17 Mustang front cradle/suspension assembly and widen the old Mustang body to fit the newer car width...wheels would look good too without a weird wide flare setup. Yes you'll have to have custom windshield and rear glass cut and widen the hood/roof/decklid panels, but that's easier than cobbling together a DIY front subframe that may not work. Just my 2 cents.
sannio komi
sannio komi - 3 måneder siden
Dont give up!!! Its alot of work, but SO WORTH IT BROOOO!!! take your time, do it right but ultimately DO IT!
stan sheldon
stan sheldon - 3 måneder siden
you are doing a great job. You will be driving down the street before you know it.
huttio srreu
huttio srreu - 3 måneder siden
most wouldn't have taken. Lots of skills should be gained from its completion. I'll be waiting for the next video.
Thesubiedudee
Thesubiedudee - 3 måneder siden
Speedtech performance might be able to help you out with subframes
foopyu nooui
foopyu nooui - 3 måneder siden
I had to laugh at 0:47 have to install a jack stand? ah just lift up the back of the car by hand lolol.....
foopyu nooui
foopyu nooui - 3 måneder siden
Great job you're doing
Gareth Evans
Gareth Evans - 3 måneder siden
Yeah but you made the frame adjustable. So you had an inclination it was going to be a bastard! Haha
foopyu nooui
foopyu nooui - 3 måneder siden
roadstershop.com/product/full-chassis/1964-70-mustang-spec-chassis/
my burrito 1567
my burrito 1567 - 3 måneder siden
Hey Vtuned, you want to reach out to Grant Schwartz at Schwartz Inc for chassis ideas. Hes got 30 years in the biz and you would have seen him on Vegas Rat Rods. Great guy!
Jan Wizzarak
Jan Wizzarak - 3 måneder siden
🏓🏸🌟🌘🌗🎌🎌⛲⛺🚿💈🌁🌖🌪🌤🎌🎌⛲⛺⛈⛅🎾 *Jesus Christ is the Son of God & promises you eternal life if you simply believe Him.*
*He promised to also heal your body. (look up and ask HIM)*
William Taylor
William Taylor - 3 måneder siden
It's all steal and he gently picks it up without cracking his balls.
foopyu nooui
foopyu nooui - 3 måneder siden
Please use safety when u use the grinder I notice you have no guard to it
MI Dom
MI Dom - 3 måneder siden
hi this guy is trying to do the same as you... https://www.youtube.com/channel/UCMgk1R0_ZbEQrEhQWRYkVIA
bilisha coli
bilisha coli - 3 måneder siden
I had to laugh at 0:47 have to install a jack stand? ah just lift up the back of the car by hand lolol.....
FishNFoolLures
FishNFoolLures - 3 måneder siden
this kid is totally clueless he is using a cutoff wheel to grind with lol. I don't see how he has any subs at all as he clearly has no clue what he is doing. At least he finally admitted he was in over his head. He will end up cutting this frame out as it will never work as is, not that it matters as this will never be a street legal vehicle as only cars with glass windshields are legal and your not going to find a 3 inch wider then stock 67 mustang windshield lol.
Deo Persad
Deo Persad - 3 måneder siden
Awesome 👍🏾 yeah it's a lot of work and planning and cutting, I follow Urchfab he's a engineer if you send information to him may help? , or there is others like Junkerup, or they may know someone? Hope you can get it sorted 👍🏾🤙🏼
bilisha coli
bilisha coli - 3 måneder siden
Have a look at Speed hunters article on the hoonicorn, there are plans for a custom built frame for a 67 mustang
Paul Forsythe
Paul Forsythe - 3 måneder siden
I love this build Vtuned keep up the hard work.
ryan J
ryan J - 3 måneder siden
B is for Build youtuber can help u. He’s done body/chassis swaps and has computer engineering programs that will help you out. Look him up.
Home of Guns and HorsePower
Home of Guns and HorsePower - 3 måneder siden
Hang in there. This is a big project with a lot to work through. You are getting there, keep on going and keep on thinking it through. Can't wait to see the finished product!
2nd Chances
2nd Chances - 3 måneder siden
Dont give up!!! Its alot of work, but SO WORTH IT BROOOO!!! take your time, do it right but ultimately DO IT!
James Sheets
James Sheets - 3 måneder siden
I admire the determination, but this project is a train wreck. Things were made so much hard than they had to be. If he doesn't give up it can be finished but it will just be the path most wouldn't have taken. Lots of skills should be gained from its completion. I'll be waiting for the next video.
Howard Swing
Howard Swing - 3 måneder siden
3 minutes going to the tire shop?
mixalis
mixalis - 3 måneder siden
https://roadstershop.com/product/full-chassis/1964-70-mustang-spec-chassis/
Mike
Mike - 3 måneder siden
Great job you're doing
Matt's Garage
Matt's Garage - 3 måneder siden
I love your enthusiasm and energy, but if you keep using that grinder like that you’ll be lucky to live long enough to finish this car... No guard, no gloves or protective wear, clearly you’ve never had one of those wheels explode on you yet, I seen about 3 real chances for you to die in this video, please work safer!
Wan Ridzwan
Wan Ridzwan - 3 måneder siden
This is awesome build
samuel johnson
samuel johnson - 3 måneder siden
Please use safety when u use the grinder
I notice you have no guard to it
Morne Oosthuizen
Morne Oosthuizen - 3 måneder siden
Dude Love the build... Keep it up!
M H
M H - 3 måneder siden
Check out Schwartz Performance (schwartzperformance.com) or Roadster Shop (roadsters.com) for ideas on chassis. Keep pressing on I'm really looking forward to the final product.
simon pizzichelli
simon pizzichelli - 3 måneder siden
for the frame take a look at Art's Mustang photos he makes custom lowered and widened frames and suspension and he uses custom made metal flares to fit any car or you can get universal ones from Ulterior Motives
https://www.instagram.com/t34speed
https://www.umshop-store.com/
ridgid85
ridgid85 - 3 måneder siden
Amazing work my brotha! Props on tackling the hardest of jobs and doing it with a smile and explaining along the way. I'll keep supporting you and your channel, hopefully one day you've got the same audience as your goonzquad boys, who wouldn't be able to do more than fenders and paint without you. I can't wait to see this car rip!
Alex Eastman
Alex Eastman - 3 måneder siden
Have a look at Speed hunters article on the hoonicorn, there are plans for a custom built frame for a 67 mustang
Fred Jan
Fred Jan - 3 måneder siden
242 disliked the video!! why ? i don't understand, just haters i believe
bj red
bj red - 3 måneder siden
vtuned does it like no other!
terry burton
terry burton - 3 måneder siden
You got this bro. Keep believing in yourself
soniyu ziuy
soniyu ziuy - 3 måneder siden
Happy to see you go all-in brother! I'll be here supporting your hard work 💪 3 times a week!
Zahid Arifi
Zahid Arifi - 3 måneder siden
What widebody???
M3D1ATED
M3D1ATED - 3 måneder siden
Lowerd
canibme plz
canibme plz - 3 måneder siden
There are a lot of older guys that know a lot that never were ambitious. Imagine where you'll been 10 years from now if the big projects don't beat you up too much
soniyu ziuy
soniyu ziuy - 3 måneder siden
CAD monkey is watching and can give you the needed info?
Rosa Mejia
Rosa Mejia - 3 måneder siden
https://youtu.be/IK8pK5wiZt8
kaveh fouladgar
kaveh fouladgar - 3 måneder siden
Wonderful
Carlos Morales
Carlos Morales - 3 måneder siden
Nobody cares about your shopping for parts kids...
Scabootie
Scabootie - 3 måneder siden
I could hear the pain in his voice when he said he's about to post up 3 vids a week
live and let live
live and let live - 3 måneder siden
Put the guard back onto your grinder. Ask me how I know!
عبدالهادي صالح hady saleh
https://youtu.be/AyvlPNKOPik
lost& found
lost& found - 3 måneder siden
like the build but im kind of wondering that this car will weigh more than a chrysler 300c with all that extra steel your putting into it
kickit59
kickit59 - 3 måneder siden
Vtune this is a huge project for sure but your the right man for the job! I am looking forward to seeing you solve the issues and get this Stang back on the road!
InkkASaur
InkkASaur - 3 måneder siden
You spelled lowered wrong
Chris Mahoney
Chris Mahoney - 3 måneder siden
Vtuned wore his seatbelt!!! OMG dude, thank you for listening over the years. We want to see you around for future videos, not sticking half way through a windshield of a wrecked car.
Bob A
Bob A - 3 måneder siden
Epic dude! Keep it going. You are doing outstanding work just as I figured from the get go! Cheers!
Richard M
Richard M - 3 måneder siden
You should go check out vehcor channel he putting together a 65 mustang body on 2015 ford Mustang chasis
TG Joshuaki
TG Joshuaki - 3 måneder siden
Ayyy big boy on the trending page
Salvador Vazquez Jr
Salvador Vazquez Jr - 3 måneder siden
Holy crap a 45min ad then a 15 sec after that you are lucky I like your YouTube channel because i would of skip it lol hopefully you get paid big for that lol keep up the great job cant wait to see the mustang run soon.
marty martin
marty martin - 3 måneder siden
Killah!!! Wearing your seat belt! Good job! I wish I could help you out on the frame design, but I you passed my ceiling when you dragged the ol' coyote into the shop. Perhaps a CAD monkey is watching and can give you the needed info?
Joe Booth
Joe Booth - 3 måneder siden
Your doing just great 👍🏻 coming right along
Andy
Andy - 3 måneder siden
Years ago fatman fabrications had a weld up front suspension kit for mustangs call them tell them what you're doing they can build it. In NC
Steve Bianco
Steve Bianco - 3 måneder siden
You should contact Dave kindig (I think that’s how you spell it) he’s always getting frames
Richard ponthonnier
Richard ponthonnier - 3 måneder siden
Like the out...tro much improved
The DIY Tuners
The DIY Tuners - 3 måneder siden
Yh don't just rush it for youtube bro too much of that about already. Take your time get it right and it will be worth it 👌
josS S
josS S - 3 måneder siden
keep the faith mate, we love it.
DoableDIY
DoableDIY - 3 måneder siden
VT reminds me of a young Chip Foose.
TheJustonemore
TheJustonemore - 3 måneder siden
Love the screwdriver marker
N. Lee Ball
N. Lee Ball - 3 måneder siden
Son, You are doing a fine job. You are figuring it out as you go. Therefore you are gaining knowledge that will make later builds go so much easier. Hang in there! Don't ley the keyboard critics dampen your enthusiasm. Nobody builds a project like this very fast. Take more time away from it if you have to so that you can figure out your next move. In the end, it will be great!
davesmoking
davesmoking - 3 måneder siden
Doing a cracking job I build ultra 4 race cars over in uk and you will be going over things or changing things all throughout the build as for drawing it up we do all that and still never works as some parts your going to fit may change just keep mocking it up as you go and don't weld anything fully just tack everything to the hole things built or it's a right ball ache to cut it up
Neste