Rebuilding My Wrecked BMW M4 Part 2

5 105
73
 
Welcome back to another episode today we get started on the m4 body work!
Follow us on instagram instagram.com/vtuned
Work with us Email Vtunedgarage@gmail.com
Music used
LAKEY INSPIRED - Chill Day
Download→ soundcloud.com/lakeyinspired/...
Happy by MBB soundcloud.com/mbbofficial
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library noburn.info/id/video/zWrWqKyLko-siZQ.html
Song: Jarico - Island (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: noburn.info/id/video/zY7PddJldaWMraA.html
Track: NIVIRO - Flashes [NCS Release]
Music provided by NoCopyrightSounds.
With You by Declan DP soundcloud.com/declandp
Licensing Agreement 2.0 (READ)
www.declandp.info/music-licensing
Music promoted by Audio Library noburn.info/id/video/mmetidxpepl6pXI.html
Motor
Runtime: 12:39

Kommentarer

Anthony Supplee
Anthony Supplee - 4 måneder siden
V, you’re cool, you’re a Good Guy BUT, if you wipe that dirt off your chin, you’d be cooler! Or add to it full Goat
mrwaltzerboy
mrwaltzerboy - 6 måneder siden
Bodge it n scarper. Primer n paint need to be applied in a dust free clean environment not in the middle of a garage. Plus the fact u cleaned the bumper then primed it in filthy dusty clothes defeats the object really. It may look good once done for a few weeks but then cracks will start to show of your bodge work.
vTuned garage
vTuned garage - 6 måneder siden
It’s been over a year still looks perfect...
Major Disaster
Major Disaster - 6 måneder siden
PPE bro
Архитектор Мендисабаль
Like... Job very good. Im is crimea live. am Job to paint Car.
Michael Tyre
Michael Tyre - 7 måneder siden
He uses one of the cheap harbor freight gravity feed guns too, they work awesome for the money.
Jefferson de nobrega
Jefferson de nobrega - 8 måneder siden
4:09 amazing work from this guy!
EDUARDO GARCIA
EDUARDO GARCIA - 8 måneder siden
Hey bro where is your shop
D Figueroa
D Figueroa - 10 måneder siden
I typically don’t comment on videos but you deserve it ! Awesome work bro ! Straight to the point best of luck.
David Farley
David Farley - 10 måneder siden
Why not just use spot putty and a hard block to do your ruff in then go to the soft block, when I was doing this we used lead and had to tin the damage first, then we used our lead rods bee's wax and a wooden paddle then used a body file to repair the damage
Performance Rebuilds
Performance Rebuilds - 11 måneder siden
I used to own a M4 in the same colour, really awesome cars, very informative video.
Gamer84211
Gamer84211 - 11 måneder siden
This is my favourite colour for a bmw M4. I used to have a M4 in the same colour.
MrSant67
MrSant67 - 11 måneder siden
It is an easier repair to not apply filler to half the fender/bumper. And then have to sand it, very amateur.
Anton Valentine
Anton Valentine - År siden
“These Germans are really smart!”😂 felt a little condescending but whatever lol
Michael Wiebers
Michael Wiebers - År siden
How in the world are you able to know what to do to even start work on a car? Is there a website you go to that gives you this information?
I'm an old man and won't do any car work, but I am interested. That's an interesting color combination; gold and red? Well you're stuck with it, but black interior to me would be esthetically better. Have always enjoyed your videos from the first time I saw them. Like that you show us the actual working on the car. Very professional. Best of luck on this car, but I'm sure you will do fine.
BY
BY - År siden
Je passe des bon moments en regardant les vidéos 👍
ahmet durmaz
ahmet durmaz - År siden
I am really fascinated by your work. Nice Video dude.
Bartosz Owczarek
Bartosz Owczarek - År siden
Amerykaniec i ze szpachlą lata ;D chyba był w Polsce na praktykach :D
ZM MZ
ZM MZ - År siden
How I see u don't have any idea how do body work noob
Bruno Oliveira
Bruno Oliveira - År siden
Esse maluco é treta!! Shouts from Brazil!
ASSK555
ASSK555 - År siden
This is what you call a professional
Ron
Ron - År siden
I know nothing about this stuff. Do you necessarily need to use filler on the rear corner? I understand repainting but, it's going to be well hidden...
Castro Nevic
Castro Nevic - År siden
what ist that for Body Filler ? The white i mean
Jerk Of All Trades
Jerk Of All Trades - År siden
You didn’t use metal etch before primer
Nabil Karroumi
Nabil Karroumi - År siden
What kind of power tool are you using. It looks electric and powerful . could you please tell me which one it is?
EDUARDO CESAR DE OLIVEIRA NETO
👍👍👍👍👍
Vahagn khachatryan
Vahagn khachatryan - År siden
its actually painful to watch what you are doing since its very obvious to a professional you have no idea what you are doing man, if this was in Australia they would have failed the VIV inspection in a heartbeat and declared the car unregistrable due to your poor quality repairs. This is why people are so careful of buying used cars after seeing hacks like this guy butcher this car with such easy repairs.
vTuned garage
vTuned garage - År siden
Lol
abu khalid
abu khalid - År siden
great job but you should wearing a gloves for safety
Ql 15
Ql 15 - År siden
This is such a good life. Relaxing, repairing cars☺️
Ql 15
Ql 15 - År siden
I mean relaxing is to fix cares
Jabba Sjz
Jabba Sjz - År siden
Don't ever put putty straight onto metal, it's a great food for rust. Use proper 2K epoxy primer first, then putty, sand, again epoxy, filler primer, sand, acrylic primer.
Big Yeet Daddy
Big Yeet Daddy - År siden
great job, your videos make me love cars more and more.
AmyirtanTolgakrky
AmyirtanTolgakrky - År siden
This hit/fast car is nothing for low brain babys under 30+
davidelcaid
davidelcaid - År siden
i never thought that bumper was actually usable and could be rescued wow
Arminas ArminaS
Arminas ArminaS - År siden
Just click on random video and i like this 🤩😍😍😍 SUBSCRIBE
John Pitcher
John Pitcher - År siden
Too much music, a bit more chatting required.
havkacik
havkacik - År siden
When you rebuild metal frame like that, structural integrity of the metal is corrupted. Is there any other way how to fix the frame damage? Is there a way for a garage to get new metal part and weld it to the non corrupted parts?
Gilbert Franklin
Gilbert Franklin - År siden
Anyone who wants to see how good this rebuild channel really is, just go watch Randy on Auto Auction Rebuilds - all talk, no action. Here we get to see the work being done... 👍
Алёша Пап
Алёша Пап - År siden
За такую рихтовку и шпаклевку руки тебе бы оторвать , весь гермет оригинал содрал и намазал херни хз зачем , лучше вообще не трогал бы там ,
MrKansai1 teghe
MrKansai1 teghe - År siden
I like your filler, it seems like it is something glue -ish. Isn't it? What was the grind you used for sanding the rear bumper for the first time? Looked sharp.
I also do hope a lot for keeping about as much not painted panels as I can. It is not only the time and the work you need to put into one.
As a buyer (future owner) of a used car, you probably look for the one without painted panels or some very little, if possible? So do I and yes, people that are serious buyers do ask a specialist about the shell value. because no matter what, you will never make paint job so precisely and so thin that it will look like a factory robot work.
That's why even before buying the car (fix and resell or else) I do check local and internet shops for used panels in original paint of the color number the car I'm going purchase. Also, I tend to not paint the panel if there are only a few very minor cuts and scratches - when no rusting or causing the visible look issue. It certainly adds some honesty to the rebuild. Sometimes you just don't want another 70% 2nd time painted ride.
I wish you guys all the best.
MrKansai1 teghe
MrKansai1 teghe - År siden
Guys, you do a lot of work and you show it - which is great, but... please keep in mind to not repeat yourself in more than 2 breaks/summing ups/disclaimers of yours. Just take your time, maybe to figure out about something funny or something unusual at your garage, with your work, etc. People gonna love that since you will show yourself more personal.
nikond90
nikond90 - År siden
The details you provide are awesome,
Rob C
Rob C - År siden
great skills for a younger guy! very impressed !
Ismail Congar
Ismail Congar - År siden
I like this man work and speak not to much
JimmyJJ 1996
JimmyJJ 1996 - År siden
Always wondered what why did my bmw bumper firm throw away all the "not" perfect bumpers , when you could sell it used/replacment and cash out real easy
artbyrobot
artbyrobot - År siden
I find it annoying that instead of buffing out scratches and using some scratch repair techniques, these guys sand down the entire bumper and repaint the whole thing with like $80-150 worth of urethane paint and then 3 coats of clear. Super overkill. Scratch repair can cost next to nothing if you know what you are doing. Same with little dents. Paintless dent repair is the way to go and he often skips this simple method and instead replaces and paints ENTIRE PANELS that just had small dents that paintless dent repair could have solved to perfection. Just very wasteful from a monetary standpoint.
Ryan O'Connell
Ryan O'Connell - År siden
Can you teach the "B is for Build" guys how to do professional safe bodywork?
Ima Starboy
Ima Starboy - År siden
dope build, hope to see u finish it
Superboss1
Superboss1 - År siden
I am hooked. You dude are awesome. Got some mad rebuilding skills.
Scabootie
Scabootie - År siden
Wouldnt you need to apply a primer to the bare metal?
Jay
Jay - År siden
Talented young man, no messing around. Subbed.
Mario Rivera
Mario Rivera - År siden
harbor freight special
Luke Jones
Luke Jones - År siden
Hey man, since I know you read the comments.
Look into isocyanate exposure.
It's in virtually any paint you mix a hardener into ; bases, primers, clears etc.
It's a cumulative poison and enters through your skin, ears, eyes, and obviously lungs. Once you reach a threshold of exposure you become sensitized and can't work around these products anymore and you can also develop work related asthma. I see you have a downdraft booth and that's awesome but even the best masks don't stop this particular chemical ; only fresh air supplied masks and fresh air supplied shields prevent inhalation.
Do some research ; isocyanates are wicked.
Just looking out for ya ; use protection🤙
James Allen
James Allen - År siden
spray booth is filthy
vTuned garage
vTuned garage - År siden
That’s the prep room yea it’s a little dirty
Alessandro Giannotti
Alessandro Giannotti - År siden
First time here... really good job! And nice channel. Instant Sub 😁
Hessu55
Hessu55 - År siden
why do you body fill behind the bumber ? To hide the car was in an accident ?
Saiful Nasque
Saiful Nasque - År siden
Did he own this workshop?
Stu F
Stu F - År siden
Love seeing the guy in the background with his sandals on happily working away!!
T'airn'KA
T'airn'KA - År siden
Seeing the "plastic" being applied reminded me of my Auto Body instructor demands that, when finished (ready for primer) it must be no more then a 32nd of an inch thick.
We all knew that was nearly impossible (in a production shop) but no one asked for a demo so he come around, look at it from different directions, run his hand over it then either give an Ok (rarely), fix this (fairly often) or do it over (dreaded words). I think he was happy at a 16th of an inch thick.
It was over 40 years ago, maybe it was a 64th of an inch and be happy with a 32nd?
theBigMoose
theBigMoose - År siden
You sir are a magnificent artist in metal and plastic! I salute you!
Glad to see you using PPE too. Sure wish my generation would have known to use breathing masks and gloves back in the 70s...
Jonathan Bishop
Jonathan Bishop - År siden
Love that you just get in to the vid! No waffle, no breakdown of what’s to come or pointless small talk. Also, really like how much care you put in to the rebuild. Best of luck, and you have earned a subscriber! Cheers from the UK ✌🏻
butts
butts - År siden
is that a harbor freight HVLP paint gun?
Adrian King
Adrian King - År siden
Much better than another channel who butchered a rebuild of a Nissan GTR.. Can see you're doing it properly.
Kudos,
Elijah Chigwada
Elijah Chigwada - År siden
Yo VTuned you need to work on your video delivery bro, like talk more with more enthusiasm bro, like what you doing is really cool. If you kill the delivery you will get 1 million subscribers real quick bro. Keep hustling bro, I believe in you.
neletg
neletg - År siden
Paint it black.
Gooble Gobble
Gooble Gobble - År siden
Amazing channel dude keep it up!
Chuck abbate
Chuck abbate - År siden
I don't like the color combo on that BMW but I do like your channel.  Your videos are well done and to the point.  I'll be watchingthanks!  Chuck
Streamak
Streamak - År siden
Found my way here from goonzquad. You just got a new fan bro
Nate Fantetti
Nate Fantetti - År siden
You're pretty good. Impressive... How long you been doing this? Also age?
Enrico Grassi
Enrico Grassi - År siden
Hi, where can I find the technical manuals of the car where all the parts are shown? Serial numbers etc.?
Lloyd Mills
Lloyd Mills - År siden
Those germans!!
Michael Cooper
Michael Cooper - År siden
Keep up the work, be careful using a DA near body lines and especially plastic bumpers really easy to lose your lines (hard learned and expensive lesson).
mr. m
mr. m - År siden
What is the plan for this car? Are you going to sell it or keep it for a personal vehicle?
Corey Staudt
Corey Staudt - År siden
"These germans, theyre really smart..."
😂😂😂💀
Sam Heine
Sam Heine - År siden
This guy does not waste time. A real pro.
DeadShot
DeadShot - År siden
that paintless dent guy could have done the dent on your front fender
Dennis Brill
Dennis Brill - År siden
I scribe button won’t work for some reason I don’t know why but I’m watching now so I’ll see everything you do work on cars
Markus Hansen
Markus Hansen - År siden
Your videos remind me of the show Wheeler Dealers on Discovery :D Great composition of explanation and montage
C F
C F - År siden
Really miss Ed China working his magic on cars. What a great mechanic solved so many problems on a huge variety of car models.
dennisphoenix1
dennisphoenix1 - År siden
Good to see you wearing a dust mask while sanding ☺
Manythingstodo2122
Manythingstodo2122 - År siden
What the difference of dry and wet sanding? I wet sand my car's front side panels and it rusted after 4-5 months.
Muhammad Nadeem
Muhammad Nadeem - År siden
Great
johnnyshd
johnnyshd - År siden
A good bodyman is a dying breed. Nobody wants to work with their hands. I have done it for 45 years.
D FULL
D FULL - År siden
The bodywork needs help and would fail if done at an Authorized BMW repair center. In fact, BMW does not support paintless dent repair either as there is no way to know if the underlying sealer and other factory coatings have been damaged or not. PDR companies commonly drill holes in panels to gain access to perform their craft. Those holes are then just plugged with a plastic/rubber plug. They don't typically put any paint on the bare metal for rust protection. Just a warning that's all.
JohnDamenify X
JohnDamenify X - År siden
Fun to watch! Sounds like a real nice guy, who knows what he´s doing!
Robert Stockdale
Robert Stockdale - År siden
Great that there is a nice nondescript soundtrack to the video, often car videos are ruined with particularly bad heavy metal stuff that most people hate. The videos are awesome.
Hamid Ali
Hamid Ali - År siden
Keep the good work up my man.
Jay Meow
Jay Meow - År siden
This is the great thing about youtube. anyone that doesn’t know the first thing about fixing a car properly or anything else can make a stupid video and the rest of the fools that don’t know any better think that he’s so great. look up bmw procedures on the TIS website maybe then you could get your head out of your ass. everything you did on this video is wrong. you can even mix the filler to its proper measurement.
vTuned garage
vTuned garage - År siden
Ok smart ass explain how it’s wrong?
eyobin2
eyobin2 - År siden
Should have a million subscribers easy.
D FULL
D FULL - År siden
You should have left the fender on the car and reached the damage from the back through the wheel opening. Anyone who really knows will see the tell tale loss of paint around the fender bolts and know it has been off and will wonder why. Also be careful with the DA on the bumper body lines. It is very easy to damage them just enough to make them wavy. Another "tell" that some may pick up on.
Anyways, your skills and knowledge will improve with experience so keep it up.
willipic
willipic - År siden
@D FULL Tennessee does, that's where he is at.
D FULL
D FULL - År siden
@JCEvo not all states support "salvaged" on the title. Plus, anything you can do to minimize visible damage works in your favor.
JCEvo
JCEvo - År siden
wouldn't the car have a salvage title? that would let anyone buying the car know there was work done to it.
STEVE Cramer
STEVE Cramer - År siden
No plastic ad pro? Does that surfacer go direct to plastic? The surface primer looks like a inexpensive off brand.
Ronald Moparornocar
Ronald Moparornocar - År siden
Great video 👍 but what I am wondering is why none of you are putting an epoxy primer on your bare metal repairs before you do body work ie mud/Bondo/filler and epoxy over to encapsulate the filler then primer filler great videos all the same congrats on over 100k viewer's
alexis betancourt
alexis betancourt - År siden
I would have liked to see you replace the front bumper brackets in one video they weren't there than they were?
subie123 subie456
subie123 subie456 - År siden
To remove plastic clips I really recomend the clip remover from Snap-on.
kickit59
kickit59 - År siden
Vtune like always you are doing like OEM or better man! Looking forward to seeing this one when it's done!
CAmille Williams
CAmille Williams - År siden
hurry up i need to see part 3
Benjamin Smith
Benjamin Smith - År siden
Nice 100k! Keep it up man!
christopher nguyen
christopher nguyen - År siden
being very young and allot of experience keep it up. your future look good man!
Pistol Graan
Pistol Graan - År siden
Well u kinda took everything from goon squad
vTuned garage
vTuned garage - År siden
Yea they actually fix my cars I’m an actor
Masterek79
Masterek79 - År siden
6:44 what gradation paper did you use here? 300/600 ?
Peter Kryvdyuk
Peter Kryvdyuk - År siden
Слава Україні
Jose Ramirez
Jose Ramirez - År siden
Samcrac would have left all those dents in 🤣🤣🤣🤣
Romeo Neosign
Romeo Neosign - År siden
Is he a friend of Goonzquad? if so, nice to see u on youtube.
Neste